Self Lubricating Spherical Plain Bearing
Self Lubricating Spherical Plain Bearing
2021年12月11日
Knowledge Points Of Four Different Types Of Crushers
Knowledge Points Of Four Different Types Of Crushers
2021年12月11日

Radial Spherical Plain Bearing

 

(1) Ge… E single outer ring without lubricating oil groove.

It can bear radial load and small axial load in either direction.

 

(2) Ge… Es single seam outer ring with lubricating oil groove. It can bear radial load and small axial load in either direction.

 

(3) Ge… Es-2rs single seam outer ring, with lubricating oil groove and sealing rings on both sides. It can bear radial load and small axial load in either direction.

 

(4) Geew… Es-2rs single seam outer ring, with lubricating oil groove and sealing rings on both sides. It can bear radial load and small axial load in either direction.

 

(5) Ge… ESN single seam outer ring with lubricating oil groove and stop groove. It can bear radial load and small axial load in either direction. However, when the axial load is borne by the stop ring, its ability to bear the axial load is reduced.

Radial Spherical Plain BearingRadial Spherical Plain Bearing
(6) Ge… XSN double-slit outer ring (split outer ring), with lubricating oil groove and stop groove.

It can bear radial load and small axial load in either direction. However, when the axial load is borne by the stop ring, its ability to bear the axial load is reduced.

 

(7) Ge… HS inner ring has lubricating oil groove and double half outer ring. The clearance can be adjusted after wear. It can bear radial load and small axial load in either direction.

 

(8) Ge… DE1 type inner ring is hardened bearing steel and outer ring is bearing steel. The inner ring is extruded during assembly, with lubricating oil groove and oil hole. Bearings with inner diameter less than 15mm shall be free of lubricating oil groove and oil hole. It can bear radial load and small axial load in either direction.

 

(9) Ge… Dem1 type inner ring is hardened bearing steel and outer ring is bearing steel. When the inner ring is assembled, it is extruded. After the bearing is installed into the bearing seat, the end groove is pressed out on the outer ring to fix the bearing axially. It can bear radial load and small axial load in either direction.

 

(10) Ge… DS type outer ring has assembly groove and lubrication groove. Limited to large bearings. It can bear radial load and small axial load in either direction (one side of the assembly groove cannot bear axial load).